Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 434

Страница: 434 / 703

NOTE:

If you experience difficulty in playing a particular

disc, it may be damaged (i.e., scratched, reflective coating

removed, a hair, moisture or dew on the disc) oversized,

or have protection encoding. Try a known good disc

before considering disc player service.

RADIO OPERATION AND MOBILE PHONES

Under certain conditions, the mobile phone being on in

your vehicle can cause erratic or noisy performance from

your radio. This condition may be lessened or eliminated

by relocating the mobile phone antenna. This condition is

not harmful to the radio. If your radio performance does

not satisfactorily “clear” by the repositioning of the

antenna, it is recommended that the radio volume be

turned down or off during mobile phone operation when

not using Uconnect® (if equipped).

General Information

This device complies with Part 15 of the FCC rules and

RSS 210 of Industry Canada. Operation is subject to the

following conditions:

•

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

•

This device may not cause harmful interference.

•

This device must accept any interference received,

including interference that may cause undesired op-

eration.

CLIMATE CONTROLS

The Climate Control system allows you to regulate the

temperature, amount, and direction of air circulating

throughout the vehicle. The controls are located on the

instrument panel, below the radio.

432 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды