Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 270

Страница: 270 / 703

NOTE:

If three consecutive sunroof close attempts result

in Pinch Protect reversals, the fourth close attempt will be

a Manual Close movement with Pinch Protect disabled.

Venting Sunroof — Express

Press and release the Vent button within one half second

and the sunroof will open to the vent position. This is

called “Express Vent” and it will occur regardless of

sunroof position. During Express Vent operation, any

movement of the switch will stop the sunroof.

Sunshade Operation

The sunshade can be opened manually. However, the

sunshade will open automatically as the sunroof opens.

NOTE:

The sunshade cannot be closed if the sunroof is

open.

Wind Buffeting

Wind buffeting can be described as the perception of

pressure on the ears or a helicopter-type sound in the

ears. Your vehicle may exhibit wind buffeting with the

windows down, or the sunroof (if equipped) in certain

open or partially open positions. This is a normal occur-

rence and can be minimized. If the buffeting occurs with

the rear windows open, open the front and rear windows

together to minimize the buffeting. If the buffeting occurs

with the sunroof open, adjust the sunroof opening to

minimize the buffeting or open any window.

Sunroof Maintenance

Use only a non-abrasive cleaner and a soft cloth to clean

the glass panel.

268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды