Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 23

Страница: 23 / 703

REMOTE KEYLESS ENTRY (RKE)

This system allows you to lock or unlock the doors and

liftgate, and activate the Panic Alarm, optional power

liftgate, left power sliding door, and right power sliding

door from distances up to approximately 66 ft (20 m)

using a hand-held Key Fob with RKE transmitter. The

RKE transmitter does not need to be pointed at the

vehicle to activate the system.

NOTE:

Inserting the Key Fob with RKE transmitter into

the ignition switch disables the system from responding

to any button pushes from that RKE transmitter. Driving

at speeds 5 mph (8 km/h) and above disables the system

from responding to all RKE transmitter buttons for all

RKE transmitters.

Two RKE transmitters may be supplied with the vehicle.

Vehicles built without the powered options will be

equipped from the factory with three-button RKE trans-

mitters, and those built with power options will be

equipped with up to seven-button RKE transmitters.

Key Fob With Three-Button RKE Transmitter

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды