Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 172

Страница: 172 / 703

•

Phonebook (Downloaded and Uconnect® Phone Lo-

cal) name recognition rate is optimized when the

entries are not similar.

•

Numbers must be spoken in single digits. “800” must

be spoken “eight-zero-zero” not “eight hundred.”

•

You can say “O” (letter “O”) for “0” (zero).

•

Even though international dialing for most number

combinations is supported, some shortcut dialing

number combinations may not be supported.

•

In a convertible vehicle, system performance may be

compromised with the convertible top down.

Far End Audio Performance

Audio quality is maximized under:

•

Low-to-medium blower setting

•

Low-to-medium vehicle speed

•

Low road noise

•

Smooth road surface

•

Fully closed windows

•

Dry weather conditions, and

•

Operation from the driver’s seat.

NOTE:

•

Performance, such as audio clarity, echo, and loudness

to a large degree rely on the phone and network, and

not the Uconnect® Phone.

•

Echo at the phone far end can sometimes be reduced

by lowering the in-vehicle audio volume.

•

In a convertible vehicle, system performance may be

compromised with the convertible top down.

170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды