Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 234

Страница: 234 / 703

The sensitivity of the system is adjustable from the

multifunction lever. Wiper sensitivity position 3 has been

calibrated for best overall wiping sensitivity. If the opera-

tor desires more wiping sensitivity, they may select

sensitivity positions 4 or 5. If the operator desires less

wiping sensitivity, they may select sensitivity positions 2

or 1. Place the multifunction lever in the OFF position

when not using the system.

NOTE:

•

The Rain Sensing feature will not operate when the

wiper speed is in the low or high position.

•

The Rain Sensing feature may not function properly

when ice or dried saltwater is present on the wind-

shield.

•

Use of Rain-X® or products containing wax or silicone

may reduce rain sensor performance.

•

The Rain Sensing feature can be turned on and off

through the EVIC (if equipped). Refer to “Electronic

Vehicle Information Center (EVIC)/Personal Settings

(Customer-Programmable Features)” in “Understand-

ing Your Instrument Panel” for further information.

The Rain Sensing system has protective features for the

wiper blades and arms. It will not operate under the

following conditions:

•

Low Temperature Wipe Inhibit

— The Rain Sensing

feature will not operate when the ignition is first

switched ON, and the vehicle is stationary, and the

outside temperature is below 32°F (0°C), unless the

wiper control on the multifunction lever is moved, or

the vehicle speed becomes greater than 0 mph

(0 km/h), or the outside temperature rises above

freezing.

232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды