Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 321

Страница: 321 / 703

15. Air Bag Warning Light

This light will turn on for four to eight seconds

as a bulb check when the ignition switch is first

turned to ON/RUN. If the light is either not on

during starting, stays on, or turns on while

driving, have the system inspected at an authorized

dealer as soon as possible. Refer to “Occupant Restraints”

in “Things To Know Before Starting Your Vehicle” for

further information.

16. Shift Lever Indicator

The Shift Lever Indicator is self-contained within the

instrument cluster. It displays the gear position of the

automatic transmission.

NOTE:

•

You must apply the brakes before shifting from

PARK.

•

The highest available transmission gear is displayed

in the lower right corner of the Electronic Vehicle

Information Center (EVIC) whenever the Electronic

Range Select (ERS) feature is active. Use the +/-

selector on the shift lever to activate ERS. Refer to

“Automatic Transmission” in “Starting And Operat-

ing” for further information.

17. Vehicle Security Light — If Equipped

This light will flash at a fast rate for approxi-

mately 15 seconds, when the vehicle security

alarm is arming, and then will flash slowly

until the vehicle is disarmed.

UNDERSTANDING YOUR INSTRUMENT PANEL 319

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды