Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 316

Страница: 316 / 703

indicator system is duty cycle-based, which means the

engine oil change interval may fluctuate dependent upon

your personal driving style.
Unless reset, this message will continue to display each

time you turn the ignition switch to the ON/RUN

position. To reset the oil change indicator system (after

performing the scheduled maintenance), perform the

following steps.
1. Turn the ignition switch to the ON/RUN position (do

not start the engine).
2. Fully push the accelerator pedal, slowly, three times

within 10 seconds.
3. Turn the ignition switch to the OFF position.

NOTE:

If the indicator message illuminates when you

start the engine, the oil change indicator system did not

reset. If necessary, repeat these steps.

Electronic Vehicle Information Center (EVIC) — If
Equipped

The Electronic Vehicle Information Center (EVIC) fea-

tures a driver-interactive display that is located in the

instrument cluster. For further information, refer to

“Electronic Vehicle Information Center (EVIC)” in this

section.

7. Anti-Lock Brake (ABS) Light

This light monitors the Anti-Lock Brake System

(ABS). The light will turn on when the ignition

switch is turned to the ON/RUN position and

may stay on for as long as four seconds.

If the ABS light remains on or turns on while driving, it

indicates that the Anti-Lock portion of the brake system

is not functioning and that service is required. However,

the conventional brake system will continue to operate

normally if the BRAKE warning light is not on.

314 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды