Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 334

Страница: 334 / 703

installed, or damaged, a loose gascap indicator will

display in the telltale display area. Tighten the fuel filler

cap properly.
A loose, improperly installed, or damaged fuel filler cap

may also turn on the Malfunction Indicator Light (MIL).
If the message continues to appear for more than three

days after tightening the gas cap, have the vehicle

serviced by an authorized service center immediately.

•

Windshield Washer Fluid Low Indicator

This light will turn on to indicate the wind-

shield washer fluid is low.

EVIC Red Telltale Lights

This area will show reconfigurable red telltales. These

telltales include:

•

Door Ajar

This light will turn on to indicate that one or

more doors may be ajar.

•

Oil Pressure Warning Light

This light indicates low engine oil pressure. The

light should turn on momentarily when the engine is

started. If the light turns on while driving, stop the

vehicle and shut off the engine as soon as possible. A

chime will sound when this light turns on.
Do not operate the vehicle until the cause is corrected.

This light does not show how much oil is in the engine.

The engine oil level must be checked under the hood.

•

Charging System Light

This light shows the status of the electrical charg-

ing system. The light should come on when the

332 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды