Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 230

Страница: 230 / 703

The multifunction lever controls the:

•

Turn Signals

•

Headlight Beams Low/High

•

Flash-To-Pass

•

Front and Rear Wipers — Washer Functions

Turn Signals

Move the multifunction lever up or down and the arrows

on each side of the instrument cluster flash to show

proper operation of the front and rear turn signal lights.

NOTE:

If either light remains on and does not flash, or

there is a very fast flash rate, check for a defective outside

light bulb. If an indicator fails to light when the lever is

moved, it would suggest that the indicator bulb is

defective.

Turn Signal Warning

If the vehicle electronics sense that the vehicle has

traveled at over 18 mph (29 km/h) for about 1 mile

(1.6 km) with the turn signals on, a chime will sound to

alert the driver.

Lane Change Assist

Tap the lever up or down once, without moving beyond

the detent, and the turn signal (right or left) will flash

three times then automatically turn off.

High/Low Beam Switch

When the headlights are turned on, pushing the multi-

function lever toward the instrument panel will switch

from low beams to high beams. Pulling back to the

neutral position returns the headlights to the low beam

operation.

228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды