Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 547

Страница: 547 / 703

TRAILER TOWING

In this section you will find safety tips and information

on limits to the type of towing you can reasonably do

with your vehicle. Before towing a trailer, carefully

review this information to tow your load as efficiently

and safely as possible.
To maintain the New Vehicle Limited Warranty coverage,

follow the requirements and recommendations in this

manual concerning vehicles used for trailer towing.

Common Towing Definitions

The following trailer towing related definitions will assist

you in understanding the following information:

Gross Vehicle Weight Rating (GVWR)

The GVWR is the total allowable weight of your vehicle.

This includes driver, passengers, cargo and tongue

weight. The total load must be limited so that you do not

exceed the GVWR. Refer to “Vehicle Loading/Vehicle

Certification Label” in “Starting and Operating” for

further information.

Gross Trailer Weight (GTW)

The GTW is the weight of the trailer plus the weight of all

cargo, consumables and equipment (permanent or tem-

porary) loaded in or on the trailer in its

loaded and

ready for operation

condition. The recommended way to

measure GTW is to put your fully loaded trailer on a

vehicle scale. The entire weight of the trailer must be

supported by the scale.

Gross Axle Weight Rating (GAWR)

The GAWR is the maximum capacity of the front and rear

axles. Distribute the load over the front and rear axles

evenly. Make sure that you do not exceed either front or

STARTING AND OPERATING 545

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды