Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 510

Страница: 510 / 703

WARNING!

(Continued)

•

Unequal tire pressures from one side of the vehicle
to the other can cause the vehicle to drift to the
right or left.

•

Always drive with each tire inflated to the recom-
mended cold tire inflation pressure.

Both under-inflation and over-inflation affect the stability

of the vehicle and can produce a feeling of sluggish

response or over responsiveness in the steering.

NOTE:

•

Unequal tire pressures from side to side may cause

erratic and unpredictable steering response.

•

Unequal tire pressure from side to side may cause the

vehicle to drift left or right.

Economy

Under-inflated tires will increase tire rolling resistance

resulting in higher fuel consumption.

Tread Wear

Improper cold tire inflation pressures can cause abnor-

mal wear patterns and reduced tread life, resulting in the

need for earlier tire replacement.

Ride Comfort And Vehicle Stability

Proper tire inflation contributes to a comfortable ride.

Over-inflation produces a jarring and uncomfortable

ride.

Tire Inflation Pressures

The proper cold tire inflation pressure is listed on the

driver’s side B-Pillar or rear edge of the driver’s side

door.

508 STARTING AND OPERATING

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды