Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 544

Страница: 544 / 703

properly tightened. Refer to “Onboard Diagnostic Sys-

tem” in “Maintaining Your Vehicle” for further informa-

tion.
If the problem continues, the message will appear the

next time the vehicle is started. See your authorized

dealer as soon as possible.

VEHICLE LOADING

As required by National Highway Traffic Safety Admin-

istration regulations, your vehicle has a certification label

affixed to the driver’s side door or B-Pillar.
If seats are removed for carrying cargo, do not exceed the

specified GVWR and GAWR.

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label affixed to

the drivers side B-Pillar or the rear of the driver’s door.

The label contains the following information:

•

Name of manufacturer

•

Month and year of manufacture

•

Gross Vehicle Weight Rating (GVWR)

•

Gross Axle Weight Rating (GAWR) front

•

Gross Axle Weight Rating (GAWR) rear

•

Vehicle Identification Number (VIN)

•

Type of Vehicle

•

Month Day and Hour of Manufacture (MDH)

The bar code allows a computer scanner to read the VIN.

Gross Vehicle Weight Rating (GVWR)

The GVWR is the total allowable weight of your vehicle.

This includes driver, passengers, and cargo. The total

load must be limited so that you do not exceed the

GVWR.

542 STARTING AND OPERATING

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды