Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 586

Страница: 586 / 703

WARNING!

(Continued)

•

Only use the jack in the positions indicated and for
lifting this vehicle during a tire change.

•

If working on or near a roadway, be extremely
careful of motor traffic.

•

To assure that compact spare tires, flat or inflated,
are securely stowed, compact spares must be
stowed with the valve stem facing the ground.

CAUTION!

Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the Jacking
Instructions for this vehicle.

NOTE:

Refer to the “Compact Spare Tire” section of

“Tires – General Information” for information about the

compact spare tire, its use, and operation.
1. Loosen (but do not remove) the wheel lug nuts by

turning them to the left one turn while the wheel is

still on the ground.

Jack Warning Label

584 WHAT TO DO IN EMERGENCIES

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды