Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 49

Страница: 49 / 703

door switch is pushed. To close the door, wait until it

is fully open and then push the switch again.

•

If the power sliding door encounters multiple obstruc-

tions within the same cycle, the system will automati-

cally stop, the power sliding door motor will make a

clicking sound until the door has no further move-

ment. This clicking sound can be stopped by pulling

the inside or outside handle. If this condition occurs,

no damage is done to the power sliding door motor.

The power sliding door must be opened or closed

manually.

WARNING!

You, or others, could be injured if caught in the path
of the sliding door. Make sure the door path is clear
before closing the door.

Power Sliding Side Door Open Flash

The left and right exterior hazard lights will flash for 12

seconds when either sliding door is opened. This will

alert other drivers in the area that passenger(s) could be

entering or exiting the vehicle.
The Sliding Side Door Open Flash can be enabled or

disabled by performing the following procedure:
1. Place the Key Fob in the ignition switch.
2. Cycle the ignition switch from ON/RUN to OFF five

times ending in the ON/RUN position

(do not start

the engine).

3. Within 10 seconds of the final cycle, push the HAZ-

ARD switch ON.

4. A single chime will sound to signify that you have

successfully completed the programming.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды