Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 203

Страница: 203 / 703

7. Close the storage bin cover.

CAUTION!

The storage bin cover must be locked and flat to

avoid damage from contact with the front seat tracks,

which have minimal clearance to the cover.

WARNING!

In a collision, serious injury could result if the seat
storage bin covers are not properly latched.

•

Do not drive the vehicle with the storage bin covers
open.

•

Keep the storage bin covers closed and latched
while the vehicle is in motion.

•

Do not use a storage bin latch as a tie down.

To Unstow Second Row Seats

1. Pull up on the storage bin latch to open the cover.
2. Pull up on the strap to lift the seat out of the storage

bin and push the seat rearward to latch the seat

anchors.

3. Lift the seatback to the full upright position.

Seat In Storage Bin

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды