Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 558

Страница: 558 / 703

Towing Tips

Before setting out on a trip, practice turning, stopping,

and backing up the trailer in an area located away from

heavy traffic.

Automatic Transmission

The DRIVE gear can be selected when towing. However,

if frequent shifting occurs while in DRIVE, use the

Electronic Range Select (ERS) shift control to select a

lower gear range.

NOTE:

Using a lower gear range while operating the

vehicle under heavy loading conditions will improve

performance and extend transmission life by reducing

excessive shifting and heat build up. This action will also

provide better engine braking.

If you REGULARLY tow a trailer for more than 45

minutes of continuous operation, then change the trans-

mission fluid and filter as specified for “police, taxi, fleet,

or frequent trailer towing.” Refer to the “Maintenance

Schedule” for the proper maintenance intervals.

Electronic Speed Control — If Equipped

•

Do not use in hilly terrain or with heavy loads.

•

When using the speed control, if you experience speed

drops greater than 10 mph (16 km/h), disengage until

you can get back to cruising speed.

•

Use speed control in flat terrain and with light loads to

maximize fuel efficiency.

556 STARTING AND OPERATING

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды