Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 535

Страница: 535 / 703

E-85 Usage In Non-Flex Fuel Vehicles

Non-Flex Fuel Vehicles (FFV) are compatible with gaso-

line containing 10% ethanol (E10). Gasoline with higher

ethanol content may void the New Vehicle Limited

Warranty.
If a Non-FFV vehicle is inadvertently fueled with E-85

fuel, the engine will have some or all of these symptoms:

•

Operate in a lean mode.

•

OBD II “Malfunction Indicator Light” on.

•

Poor engine performance.

•

Poor cold start and cold drivability.

•

Increased risk for fuel system component corrosion.

To fix a Non-FFV vehicle inadvertently fueled once with

E-85 perform the following:

•

Drain the fuel tank (see your authorized dealer).

•

Change the engine oil and oil filter.

•

Disconnect and reconnect the battery to reset the

engine controller memory.

More extensive repairs will be required for prolonged

exposure to E-85 fuel.

MMT In Gasoline

Methylcyclopentadienyl Manganese Tricarbonyl (MMT)

is a manganese-containing metallic additive that is

blended into some gasoline to increase octane. Gasoline

blended with MMT provides no performance advantage

beyond gasoline of the same octane number without

MMT. Gasoline blended with MMT reduces spark plug

life and reduces emissions system performance in some

vehicles. The manufacturer recommends that gasoline

STARTING AND OPERATING 533

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды