Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 439

Страница: 439 / 703

10. Air Conditioning (A/C) Button

Press and release to change the current setting.

The indicator illuminates when ON.

NOTE:

If your air conditioning performance seems

lower than expected, check the front of the A/C con-

denser (located in front of the radiator), for an accumu-

lation of dirt or insects. Clean with a gentle water spray

from behind the radiator and through the condenser.

Fabric front fascia protectors may reduce airflow to the

condenser, reducing air conditioning performance.

11. Floor Mode Button

Air is directed through the floor outlets with a

small amount through the defrost and side win-

dow demist outlets.

12. Bi-Level Mode Button

Air is directed through the panel and floor outlets.

NOTE:

There is a difference in temperature (in

any conditions other than full cold or full hot), between

the upper and lower outlets for added comfort. The

warmer air goes to the floor outlets. This feature gives

improved comfort during sunny but cool conditions.

13. Panel Mode Button

Air is directed through the outlets in the instru-

ment panel. These outlets can be adjusted for

direction, and turned on or off to control airflow.

NOTE:

For maximum airflow to the rear, the center

instrument panel outlets can be directed toward the rear

seat passengers.

UNDERSTANDING YOUR INSTRUMENT PANEL 437

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды