Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 170

Страница: 170 / 703

Voice Training

For users experiencing difficulty with the system recog-

nizing their voice commands or numbers, the Uconnect®

Phone Voice Training feature may be used. To enter this

training mode, follow one of the two following proce-

dures:
From outside the Uconnect® Phone mode (e.g., from

radio mode):

•

Push and hold the

button for five seconds until

the session begins, or,

•

Push the

button and say the “Voice Training,”

“System Training,” or “Start Voice Training” com-

mand.

You can either push the Uconnect® Phone button to

restore the factory setting or repeat the words and

phrases when prompted by the Uconnect® Phone. For

best results, the Voice Training session should be com-

pleted when the vehicle is parked with the engine

running, all windows closed, and the blower fan

switched off.
This procedure may be repeated with a new user. The

system will adapt to the last trained voice only.

Reset

•

Push the

button.

•

After the “Ready” prompt and the following beep, say

“Setup,” then “Reset.”

This will delete all phone pairing, phone book entries,

and other settings in all language modes. The System will

prompt you before resetting to factory settings.

168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды