Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 248

Страница: 248 / 703

When ParkSense® is disabled, the instrument cluster will

display the “PARK ASSIST SYSTEM OFF” message for

approximately five seconds. Refer to “Electronic Vehicle

Information Center (EVIC)” in “Understanding Your

Instrument Panel” for further information. When the

shift lever is moved to REVERSE and the system is

disabled, the EVIC will display the “PARK ASSIST SYS-

TEM OFF” message for as long as the vehicle is in

REVERSE.

Service The ParkSense® Rear Park Assist
System

During vehicle start up, when the ParkSense® Rear Park

Assist System has detected a faulted condition, the

instrument cluster will actuate a single chime, once per

ignition cycle, and it will display the “SERVICE PARK

ASSIST SYSTEM” message. Refer to “Electronic Vehicle

Information Center (EVIC)” in “Understanding Your

Instrument Panel” for further information. When the

shift lever is moved to REVERSE and the system has

detected a faulted condition, the EVIC will display the

“SERVICE PARK ASSIST SYSTEM” message for as long

as the vehicle is in REVERSE. Under this condition,

ParkSense® will not operate.
If “SERVICE PARK ASSIST SYSTEM” appears in the

Electronic Vehicle Information Center (EVIC) after mak-

ing sure the rear fascia/bumper is free from snow, ice,

mud, dirt and debris, see your authorized dealer.

Cleaning The ParkSense® System

Clean the ParkSense® sensors with water, car wash soap

and a soft cloth. Do not use rough or hard cloths. Do not

scratch or poke the sensors. Otherwise, you could dam-

age the sensors.

246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды