94
Push Talk
What is PushTalk?
Press the PushTalk key (
@
[
P
]) to open the PushTalk phonebook. You can talk with one or more parties
(up to five people including yourself) simply by selecting the parties and then pressing
@
[
P
]. The
PushTalk charge will apply each time you press
@
[
P
]. The speaker can keep speaking while pressing
and holding
@
[
P
], and other members only listen while he/she is speaking.
The screen displays the status of the members, e.g. who is speaking now.
This feature is useful when you want to contact group members or relay a short message.
The compatible models:902i series, 902iS series, 903i series, 904i series, S, SH902iSL,
N902iX HIGH-SPEED, N902iL, 702i series (except SH702iD, N702iD,
F702iD, D702i, SA702i, SO702i), 702iS series (except N702iS, D702iF,
M702iS, M702iG), 703i series (except N703iD, F703i, D703i, P703iµ, N703iµ)
You can add a member during a Push Talk call or call a disconnected member again for the following
models
*
.
*: 904i series, 903i series, 703i series (except N703iD, F703i, D703i, P703iµ, N703iµ)
d
PushTalkPlus
PushTalkPlus allows a call among up to 20 people including yourself, using the pre-registered network
phonebook. This service makes the PushTalk more useful, e.g. you can check the status of members. The
PushTalkPlus requires a separate subscription.
d
For more details about how to use the PushTalkPlus, etc., see the guide you receive at the time of subscription.
d
Guide to the PushTalk talking screen
1
Current speaker's name
*1
("Myself" appears when you are speaking, or "?" when the speaker
is unknown.)
2
Group name specified at the time of dialing
(It is left blank if a group is not specified.)
3
Participants' names (excluding yourself)
*1
4
Status of members
*2
Calling: Calling the party.
Connected: The party is participating.
Disconnected: There is no response from the party, or the party
hung up. Otherwise, the party's terminal is out of
range or turned off.
Driving: The party's terminal is in Public mode (Driving mode).
5
Number of participants (excluding yourself)
6
Time elapsed after starting the PushTalk call
7
Hands-free ON
*1: If the caller sets "Caller ID setting" (p.103) or "Set Caller ID" (p.102) to "ON", the name stored in the
phonebook appears. If the participant is not stored in the phonebook, the phone number appears. If the
caller sets "Caller ID setting" or "Set Caller ID" to "OFF", "User unset" appears on the receivers.
*2: "Calling", "Driving" and "Disconnected" appear only if three or more people are talking.
Hello
Caller
Receiver
I’m coming soon.
Caller
Make
a call
Receiver
Receiver
Receiver
Receiver
One-to-one
communication
One-to-many
communication
Press and hold
@
[
P
]
to speak
Press and hold
@
[
P
]
to speak
1/2
PushTalk talking
HarukoKeitai
JiroDocomo
ShiroDocomo
HanakoKeitai
Joined number 1/4
HarukoKeitai
Ski fellows
40s
Speaker
②
③
⑤
④
⑥
⑦
①