69
Voice/Videophone Calls
Function menu (Prefix setting screen)
<Sub-address setting>
Setting Sub-addresses When Making Calls
This function enables you to set "
*
" contained in a phone number as a separator so that numbers
following "
*
" are recognized as a sub-address. Sub-addresses are available in ISDN to identify calls
made from specific communication devices or to select contents in "V-live".
a
i
X
"SETTINGS"
X
"Dialing"
X
"Sub-address setting"
X
"ON"
■
To cancel the sub-address setting
X
"OFF"
e
In the following cases, "
*
" does not function as a sub-address separator. A number including "
*
" is recognized as
an ordinary phone number.
a
"
*
" is at the beginning of a phone number.
a
"186/184" is followed by "
*
" at the beginning of a phone number.
a
"
*
" follows the number entered in "Prefix numbers".
a
"
*
590#/
*
591#/
*
592#/
*
593#" is included in a phone number.
<Reconnect signal>
MENU77
Setting the Alarm Used for Reconnection
When the signal quality deteriorates during a voice, videophone or PushTalk call to the extent that the
call drops out, a FOMA terminal will automatically reconnect the call if the signal quality quickly
improves. This function allows you to set the type of alarm given when a call is being reconnected.
d
The time needed for reconnection varies depending on communication conditions such as manipulation or
signal quality. It may roughly take about 10 seconds.
a
i
X
"SETTINGS"
X
"Talk"
X
"Reconnect signal"
X
"No tone", "High
tone" or "Low tone"
e
A call may drop out without the warning tone if signal quality worsens very quickly.
e
Call charges apply in the interval (up to roughly 10 seconds) prior to reconnection.
e
The other party hears no sound while the signal is lost.
<Noise reduction>
MENU76
Blocking Out Ambient Noise
Noise reduction is a function that suppresses ambient noise. This makes it easier for the other party in
a voice, videophone or PushTalk call to hear you when you are in a noisy location.
a
i
X
"SETTINGS"
X
"Talk"
X
"Noise reduction"
X
"ON"
■
Not to use the noise reduction
X
"OFF"
<In-car hands-free>
Making Hands-free Calls in a Car
By connecting your FOMA terminal to a hands-free device such as "In-Car Hands-Free Kit 01" (optional) or
a car navigation system, you can make or receive voice calls, etc. with the hands-free device.
For information about how to use a hands-free device, refer to the instructions provided with the device. Note
that FOMA In-Car Hands-Free Cable 01 (optional) must be used with In-Car Hands-Free Kit 01 (optional).
Edit
Edits a prefix.
Delete this
Deletes the highlighted prefix.
Delete all
X
Enter your security code
X
"YES"
Deletes all prefixes.
NOTE
NOTE
Default setting
ON
Default setting
High tone
Default setting
ON
Continued on next page
