431
Other Convenient Functions
Recording the other party's
voice during a call
a
During a call
X
s
(MEMO/CHECK)
(1 second or longer)
A FOMA terminal beeps and
recording begins. The terminal
beeps 5 seconds before the
recording time (about 20
seconds) ends. When recording
ends, the terminal gives a short
double-beep and the
"Recording" screen changes
back to the in-call screen.
■
To stop recording
X
d
,
t
,
y
or
s
(MEMO/CHECK)
(1 second or longer)
Pressing
y
ends the call as well as recording.
Pressing
t
does not stop recording during a
videophone call.
e
If you receive a call, use another function or a FOMA
terminal gives you "Alarm", "Schedule" or "To Do list"
alarm, recording stops.
e
You cannot record voice while a videophone call is on
hold or you are using a function menu option.
e
When 2in1 is set to A mode or B mode, when you
record the other party's voice received at the unused
number, "
★
" does not appear on the "Play/Erase
msg." screen and you cannot play the voice memo.
e
While you are holding a voice call, you can activate Voice
memo (in-call) to record voice by following the steps below:
X
i
X
"LIFE KIT"
X
"Voice memo
*
"
*: "Voice memo (in-call)" may appear as the menu item
depending on the menu theme.
Recording your voice in
standby mode
a
i
X
"LIFE KIT"
X
"Voice memo
*
"
X
"YES"
X
Record a voice memo
*: "Voice memo (in-standby)" may appear as the
menu item depending on the menu theme.
When a FOMA terminal beeps, begin speaking
into the mouthpiece. The terminal beeps 5
seconds before the recording time (about 20
seconds) ends. When recording ends, the terminal
gives a short double-beep and the "Recording"
screen changes back to the "LIFE KIT" list screen.
■
To stop recording
X
d
,
t
or
y
Pressing
y
returns to the standby screen
and saves the recorded voice.
<Voice announce>
MENU91
Recording and Playing
Alarm Tones and On Hold Tones
This function enables you to record your voice
and set it as an original ring tone or answer
message.
c
You can make two voice recordings: "Voice
announce 1" and "Voice announce 2".
c
You can record a memo for approximately 15
seconds.
c
Voice recorded here can be set to the following
functions:
a
Ring tone
a
Ring tone for Call setting w/o ID
a
Ring tone for Multi Number
a
Ring tone for Number B of 2in1
a
On hold tone
a
Holding tone
a
Answer message for Record message
a
Alarm tone for Alarm
a
Alarm tone for Schedule
a
Alarm tone for To Do list
a
Alarm tone for Notice designate calls
Recording voice
a
i
X
"LIFE KIT"
X
"Voice announce"
X
Select an item to
record voice
X
"YES"
b
Record voice
Speak into the mouthpiece. The
terminal beeps 5 seconds before
the recording time (about 15
seconds) ends. When recording
ends, the terminal gives a short
double-beep and the
"Recording" screen changes back to the in-call
screen.
■
To stop recording
X
d
,
t
or
y
Pressing
y
during recording returns to the
standby screen and saves the recorded voice.
e
You cannot record new voice for an option that has
already recorded voice. Erase recorded voice to
record new voice.
e
If you receive a voice, videophone or PushTalk call,
use another function or a FOMA terminal gives you
"Alarm", "Schedule" or "To Do list" alarm, recording
stops.
Playing recorded voice
a
i
X
"LIFE KIT"
X
"Voice announce"
X
Select an item to record voice
■
To stop playback
X
d
,
t
or
y
NOTE
■
Important
c
It is recommended to take notes of the contents of
voice memos.
c
The trouble, repair, etc. of the FOMA terminal may
erase the contents of voice memos. NTT DoCoMo
accepts no responsibility whatsoever for any such
loss of data and users are advised to make a note
of the recorded messages and memos as a
precautionary measure.
In-call
Ｒｅｃｏｒｄｉｎｇ
９／ ４（Ｔｕｅ）１２：０５
MENU43
NOTE
Voice announce
Ｓｅｌｅｃｔ
ＦＵＮＣ
Ｖｏｉｃｅ ａｎｎｏｕｎｃｅ １
Ｖｏｉｃｅ ａｎｎｏｕｎｃｅ ２
Ｖｏｉｃｅ ａｎｎｏｕｎｃｅ
Function menu
¨
p.432
