4
Checking the Procedure
In data communication, the connection is made through a dial-up connection with Internet
service providers or LANs that support FOMA data communication.
Flow chart for completing the data communication setup
This section describes preparation to use packet communication and 64K data communication.
*
：
To use Internet with the FOMA terminal and PC connected, "mopera U" (you need to apply for) is useful, which supports
broadband connection, etc. Consider the plan in which you are charged only in a month when you use the service. If you
use "mopera" for which you do not need to apply, you can access Internet immediately.
For more information, visit the DoCoMo website.
Install the FOMA PC setting software
a
Enables you to use the FOMA PC setting software. "Installing the FOMA PC
Setting Software"
→
p.16
Connect to PC/Install the N904i communication setting file (drivers)
a
Connect the FOMA terminal to the PC with the FOMA USB Cable (optional).
→
p.5, 7
a
Install the N904i communication setting file.
→
p.8
Set up
a
mopera U, mopera
*
→
p.21
a
Other providers
→
p.22
Connect and disconnect
a
Connect
→
p.47
a
Disconnect
→
p.48
Connect and disconnect
a
Connect
→
p.26
a
Disconnect
→
p.28
<To set up the access point using
FOMA PC setting software>
<Not using FOMA PC
setting software>
<For packet
communication>
<For 64K data
communication>
Set up
a
mopera U, mopera
*
→
p.24
a
Other providers
→
p.25
Set up
a
Set up communication not using the
FOMA PC setting software
→
p.31
