43
Before Using the Handset
Charging the FOMA Terminal
d
You can charge the FOMA terminal using the AC adapter (optional) or DC adapter (optional). You can also
charge the terminal by connecting the AC adapter and desktop holder (optional). For more information on
charging, refer to the user's manual provided with the AC adapter or DC adapter.
Charging with the AC adapter or DC adapter
■
AC adapter
■
DC adapter
a
Open the external connector cap of the FOMA terminal
b
Plug the AC or DC adapter connector horizontally into the external
connector on the FOMA terminal
c
Plug the AC adapter into a power outlet
Plug the DC adapter into a cigarette lighter socket in a car
Charging starts.
d
After charging is completed, remove the AC or DC adapter connector
horizontally from the FOMA terminal while pressing the release
button
e
Unplug the AC adapter from the outlet
Unplug the DC adapter from the cigarette lighter socket in a car
f
Close the external connector cap of the FOMA terminal
e
When the charge lamp of the FOMA terminal (Phone) is turned off, and "
" disappears from the screen and the
message "Charge unusual Stop charge" appears, remove the AC adaptor or DC adaptor and battery pack from the
FOMA terminal then set them again to recharge. If the same error occurs again, there may be a problem or fault on
the AC adaptor or DC adaptor. Contact an NTT DoCoMo shop or service counter.
e
Keep pressing the release button of the AC adapter connector when pulling it out of the external connector on the
FOMA terminal. Using excessive force to pull the cord may cause malfunction.
e
The DC adapter must be used only for vehicles with a negative ground DC 12V or 24V. Never use it in positive-
grounded vehicles.
Standard charging time
Approx. 120 min.
NOTE
Cigarette lighter socket
Power plug
FOMA DC Adapter 01/02
Connector
100 V AC power outlet
Power plug
FOMA AC Adapter 01/02
Release
button
Plug the connector with arrows
side facing upward
Connector cap
Continued on next page