Docomo F-07E, Инструкция по эксплуатации

Страница: 187 / 228

Appendix/Index
185
●
Cannot use the terminal suddenly while using overseas.
Does usage amount exceed the limit of maximum charges
for use? For use of International roaming (WORLD WING),
the limit of maximum charges for use is set in advance.
When it exceeds the limit of maximum charges for use,
pay the charges.
● There is no incoming call overseas.
Is Restricting incoming calls set to [Activate restricting]?
→
P178
● No caller ID is notified/A notified caller ID is different
from that of the caller/Functions for using contents
saved in the phonebook or those using Caller ID
notification do not operate.
Even when a caller notifies its caller ID, it is not displayed
on the terminal unless notified from the network or
network operator used. And, a notified caller ID may be
different from that of the caller by some networks or
network operators you use.
● Cannot perform data communication overseas.
Check the data roaming settings. → P177
■ Data management
●
Data saved in microSD card is not displayed.
Reattach the microSD card.
→
P160
● Data transfer between the terminal and USB mass
storage is not performed.
Do you use USB HUB? If you use USB HUB, operations
may not be performed correctly.
●
When trying to display an image, "No thumbnail"
appears/gray frame appears on the image list.
When image data is damaged, "No thumbnail" or gray
frame may appear.
■
Bluetooth
●
The terminal cannot be connected to a Bluetooth device/
A Bluetooth communication device cannot be found
from the terminal.
Make Bluetooth device (commercially available)
registering stand-by state and then register the device on
the terminal. If you delete already registered device and
register the device again as a new device, delete the
registrations on both the terminal and Bluetooth device
(commercially available), and then perform registration of
the devices.
● Calls cannot be made from the terminal connected to an
external device such as car navigation or handsfree
device.
If calls are made several times when the other party does
not answer or is out of service, the call to this number
may be disabled. In this case, turn the terminal OFF and
ON.
■
Maps/GPS function
● Cannot set AUTO-GPS service information.
• Is AUTO-GPS function disabled due to battery low? If
AUTO-GPS is disabled by Lower-power operation
settings, AUTO-GPS service information cannot be set.
In this case, set Lower-power operation settings to [Not
suspend] or charge the battery.
→
P140
• Is AUTO-GPS operation setting set to OFF? →
P140
• Is GPS function OFF? When GPS function is OFF, AUTO-
GPS function stops. → P140