Appendix/Index
191
◆
Using software update
・
Software update should be done with battery fully charged.
It is recommended to perform while charging.
・
Software cannot be updated in the following cases.
- During a call
- When
圏外
(out of service area) is displayed
*
- During international roaming
*
- When Airplane mode is on
*
- While upgrading Android software
- When date and time are not set correctly
- When the remaining battery is not sufficient for software
update
- When the remaining memory is not sufficient for software
update
*
Even in Wi-Fi connection, update cannot be performed.
・
Software update (downloading or rewriting) may take time.
・
Making/receiving calls, communications functions and other
functions are disabled during software update. Only
incoming calls can be answered while downloading.
・
Stay in a place with strong radio wave condition when
updating software. Software update may be canceled if the
radio wave condition is not good enough.
・
If software update is not needed, [No update is needed.]
appears.
・
During international roaming or when the terminal is out of
service area, [When docomo network is not available, or
during roaming software update is not available even if Wi-
Fi is connected.] or [When docomo network is not available,
or during roaming, install cannot be started even if Wi-Fi is
connected.] appears. The same messages appear even
while connecting via Wi-Fi.
・
SMS sent during software update is stored in the SMS
center.
・
When updating software, your private information
concerning F-07E (model, serial number, etc.) is
automatically sent to the server for software update
managed by DOCOMO. DOCOMO does not use the sent
information for purposes except software update.
・
When software update has failed, the terminal may not
activate or [Update failed] appears and all operations may
become unavailable. In that case, please bring the terminal
to DOCOMO-specified repair office.
・
When PIN code is set, the PIN code entry screen appears
during resetting after rewriting and you need to enter PIN
code.
・
While updating software, do not activate other applications.
◆
Updating software automatically
Update file is automatically downloaded and software is
updated at the specified time.
❖
Automatic update setting
・
The settings of Software Update is set to [Automatic Update]
by default.
1
From the Home screen,
→
[Settings]
→
[About phone]
→
[Software Update]
2
[Configure the software update]
→
[Automatic
Update]/[Manual Update]
Содержание F-07E
Страница 1: ...INSTRUCTION MANUAL ...