Docomo F-07E, Инструкция по эксплуатации

Страница: 183 / 228

Appendix/Index
181
• In case of using an optional AC Adapter 04, is the
microUSB plug of AC adapter connected to the terminal
correctly? In case of using the included desktop holder,
is the microUSB plug connected to the Desktop Holder
correctly?
→ P29, 30
• Is the charging terminal of the terminal dirty when you
use included Desktop Holder? If it is dirty, clean it with a
dry cloth or cotton swab.
• Is a PC turned on when you use the PC connection USB
cable T01 (optional)?
• If you call, perform communication or operate functions
for a long time while charging the battery, temperature
of the terminal may be raised and the indicator LED
(red) may turn off. In high temperature status, the
terminal stops charging for safety. Wait a while until the
temperature is lowered and retry to charge.
■ Operations/Display
● No operations are performed even by pressing keys.
Is the terminal in sleep mode? Press
P
or the fingerprint
sensor to unlock.
→
P45
●
The operation time provided by the battery is short.
• Running multiple applications increases battery
consumption and usage time may become short. Exit
from applications which you are not using as follows.
- Exiting running application
→ P52
- Exiting applications with
• Use "NX! eco" to make settings for reducing battery
consumption. → P138
• Is the terminal left for a long time under the state of out
of service area? Out of service area, a lot of power is
consumed to search available radio waves.
• The operation time provided by the internal battery
varies by the operating environment and battery
deterioration.
• The internal battery is a consumable part. Each time it is
charged, time available with each charging reduces.
When the operation time is too short with the battery
fully charged, contact "Repairs" on the last page of this
manual (in Japanese only) or DOCOMO-specified repair
office.
● The docomo mini UIM card is not recognized.
Is the docomo mini UIM card installed in the right
direction?
→ P26
● The screen reacts slowly when a touch panel is tapped/
key is pressed.
When large amount of data is saved in the terminal or
transferring large-size data between the terminal and
microSD card, the reactions on the screen may be
delayed.