Docomo F-07E, Инструкция по эксплуатации

Страница: 60 / 228

Calling
58
Calling
1
From the Home screen, → [Phone]
2
[Dial] → Enter a phone number
･
To correct phone number, tap .
Notifying caller ID :
→
[Caller ID notification]
→
[Notify]/
[Not notify]
･
Your caller ID is important personal information. So,
take care when notifying people of it.
Selecting prefix :
→
[Select prefix]
→
Select a prefix
･
Select a number registered in Prefix setting (prefix) ( →
P62) beforehand to add before a phone number.
Adding 2-sec pause/wait : → [Add 2-sec pause]/[Add
wait]
→
Enter an additional number
･
You can use "2-sec pause" or "wait" to dial main phone
number and additional code in a row when entering an
additional code during a call is required for bank
balance inquiries, ticket reservation services, etc.
2-sec pause "," : When the phone number is dialed, 2-
second pause will be automatically inserted and then
additional code will be sent.
Wait ";" : When the phone number is dialed, the phone
will wait automatically and a confirmation message
for sending additional code appears. When you tap
[Yes], the additional code is sent.
3
4
When a call is ended, [End]
✔
INFORMATION
･
If your face etc. comes close to the proximity sensor during a
call, the display goes out. It is redisplayed by moving away
from the sensor.
･
When the earphone is connected or while calling with the
speakerphone, the proximity sensor stops and the display
remains on even when the face, etc. comes close to the
sensor.
･
If you put the ear to the earpiece over the hair, etc. the
proximity sensor does not work normally and the call may be
interrupted.
･
You can set to show/hide caller ID all at once in "Caller ID
notification".
→ P62
･
For details on sending touch-tone signals during a call, see
"Operation during a call".
→ P60
Making a call