Docomo F-07E, Инструкция по эксплуатации

Страница: 184 / 228

Appendix/Index
182
●
The terminal, etc. become hot while operating/charging.
While operating or charging, or if you call or watch 1Seg,
etc. for a long time while charging the battery, the
terminal, internal battery and adapter may become hot.
There is no problem and you can continue to use them.
● The terminal becomes hot while operating/charging.
If high temperature of the terminal continues, charging or
some functions may be disabled.
● The terminal becomes hot and the power turns OFF.
If you activate several applications, use camera, connect
to the Internet for a long time while charging the battery,
etc., temperature of the terminal may be raised. When the
terminal is in high temperature state for a long time,
charging or functions may stop or screen brightness may
be adjusted. And the power of the terminal may shut
down to prevent you from burns.
● The display is dim.
• Have you changed any of the following settings?
- Brightness → P132
- Privacy view → P133
- NX! eco → P138
●
Display flickers.
If [Automatic brightness] of the screen brightness is
marked, display backlight automatically changes
according to the ambient brightness. The screen may
seem to be flickering then.
→ P132
● The display has afterimages.
If the same screen is displayed for a while, afterimages of
that screen may remain even after the screen is changed
for a certain operation.
●
The clock is not on time.
The clock time may be wrong when the terminal stays
powered on for a long time. Make sure that [Automatic
date & time] of Date & time is marked and then turn OFF
and ON the terminal in a place with good signal
conditions.
→ P157
● Terminal operation is unstable.
• Instability may be caused by application that you
installed after purchasing the terminal. If the symptom
is improved when you boot the terminal in safe mode
(function for booting in near default state), uninstalling
the installed application may improve the symptom.
Boot the terminal in safe mode by one of the following
procedure.
- With the power turned on, keep pressing
P
→ When
phone option menu appears, touch and hold [Restart]
→ When confirmation screen for "Reboot to safe mode"
appears, tap [OK]
- With the power turned off, press and hold
P
for 2
seconds or more. After the docomo logo disappears
and Xi logo appears, keep pressing
D
When safe mode is booted, [Safe mode] is displayed at
the lower left of the screen. To exit the safe mode, turn
power OFF and then ON.
* Back up the necessary data before using safe mode.
*
Some widgets that you created may be removed.
* Safe mode is not a normal booting state. To use ordinarily, exit the
safe mode.