DEUTZ-FAHR FL35-70HP Series, Руководство по эксплуатации

Страница: 127 / 417

Electrical system
126
Notice:
The auxiliary fluid for startup has high inflammability. During use, keep it away from source of ignition
as far as possible (battery, connectors and etc.). Have it stored at a cool place.
Before turning the ignition key, you must:
1. Seat in the driver's seat before starting the engine.
2. Turn off all electric equipment powered by the battery (lights, direction indicator lights, fan, wiper, heating
equipment and air conditioning equipment and etc.).
3. Use the hand brake.
4. Move the main shift lever and range shift lever to their respective neutral position.
5. Move the shuttle shift control handle to the neutral position.
Ignition key
Insert the key into the ignition lock, and turn the key in
clockwise direction: ACC position (auxiliary position),
connect auxiliary electric components, such as warm air,
wiper, fan and etc.; ON position (ignition position), connect
power supply of the complete vehicle circuit; ST position
(starting position), enable the complete to start working;
after the engine is started, the key returns to ON position,
and at this moment, ON and ACC are connected
simultaneously to power components of the complete
vehicle.
The ignition lock is located on right side of the dashboard.
Fig. 4-1
Notice:
Before starting the engine, make sure that it is adequately ventilated around. Please do not start the engine
in a closed area. The emissions will cause choking.