DEUTZ-FAHR FL35-70HP Series, Руководство по эксплуатации, Страница: 164 / 417

Electrical system
163
1. Lifting lever assembly
2. Lower link assembly
3. Limit lever assembly
The lower link is connected with the lifting lever via the
front hole "A", and the lower link connected with the
limit lever via the rear hole "B".
Maximum lifting stroke of the lower link: Factory
default: 624mm (The lifting lever is connected with "A"
hole)
Fig. 4-35
4.11.2.
4.11.2.Manual adjustment of the lifting lever
●
Length adjustment of the lifting lever determines deflection of the lower link.
●
Adjustment of the lifting rod mainly refers to adjustment of horizontal position of the implement.
●
The lifting height is increased through retracting the lifting lever (e.g. during transportation of when a plough
implement requiring decrease in soil penetration is installed).
Generally, length of the lifting rod should be adjusted to its
intermediate length.
The left and right lifting levers can be adjusted by turning
the guide pipe weld unit of the middle lifting lever (
①
in
the figure).
Turn it clockwise direction to extend the lifting lever;
otherwise, retract it.
Fig. 4-36
●
4.11.3.Manual adjustment of the upper linkage
Adjustment of the upper link is mainly carried out to adjust the longitudinal and horizontal position of the
implement, and adjust consistency in the front and rear plowing depth.