DEUTZ-FAHR FL35-70HP Series, Руководство по эксплуатации, Страница: 32 / 417

Product Mark
31
●
Guarantee all implements or accessories are installed properly. If it is PTO drive implement, the revolving
speed per minute of PTO must be consistent with the revolving speed of the implement.
●
Check will be conducted to confirm whether inflation pressure of tire and tire is cracked or expanded or not.
Abraded or damaged tire must be immediately replaced.
●
Check oil level, if necessary, it will be filled.
Notice:
As per what mentioned in the above, oil that is not the same (type or viscosity) cannot be filled.
●
●
Repair and adjustment operations mentioned in the chapter of “repair” of the Operation Manual will be
executed.
●
Performances of traveling and parking brakes will be checked. If necessary, parking brake wire will be adjusted
or contact your authorized service center.
●
Check and guarantee that the cover of PTO shaft have been installed when outputting power.
●
Check and guarantee protective devices of all rotating parts are installed and are under good working state.
●
Check hydraulic system of the tractor and implement. If there is any leakage or damaged part, repair or
replacement must be conducted.
Notice:
If fuel or oil contacts skin or eyes under high pressure, it will cause serious injury, blindness and
even death. High pressure liquid leakage may be invisible. One hard cardboard or wood will be used
to seek for leakage. Don’t use your hands! Protective glasses will be used to protect your eyes. If
any liquid penetrates into your skin, please immediately consult medical personnel with similar
experience.
●
●
Before pressurizing fuel or hydraulic circuit, fastening of connecting point, flexible pipe and connector will be
checked. Before disconnecting any fuel or hydraulic circuit part, please guarantee circuit is under pressure
decrease state.
●
Guarantee all flexible pips are installed correctly.
●
Cooling device and system of the engine will be checked.