DEUTZ-FAHR FL35-70HP Series, Руководство по эксплуатации, Страница: 224 / 417

Electrical system
223
The bulb replacement procedures hereinafter apply to the
following work lights:
●
Two front work lights on the top of cab
●
Two rear work lights on the top of cab
●
Procedure for replacement of bulbs as follows:
●
Carefully clean the outside of the light unit to avoid
the risk of dirt getting on the reflector during bulb
replacement;
●
Unscrew the screw
①
at two sides of protection cover
by using screwdriver to take off protection cover;
●
Disconnect the light connector
②
from the power
supply;
●
Using a screwdriver, loosen the screw
③
, to separate
the bulb socket from the reflector glass
④
.
●
Remove the bulb by rotating it counterclockwise.
●
Install the bulb by rotating it clockwise.
●
Using a screwdriver, tighten the screw
③
, to securely
attach the bulb socket to the reflector glass
④
.
●
Connect the bulb connector
②
to the power supply.
●
Refit the protective cover. Fix it using two bolts.
Fig. 6-23
Fig. 6-24
Important:
Avoid touching the inner surface of the reflector. Make sure no foreign material gets inside the
reflector.
Two work lights in the rear of the fender