DEUTZ-FAHR FL35-70HP Series, Руководство по эксплуатации, Страница: 197 / 417

Electrical system
196
5.2.Wheel Tread Calculation
5.2.1.Minimum wheel tread
Rear wheel tread
Depending on the width of the tires, it may not be possible to use all the track width settings listed here as the tire
may foul the fender. Choose a track width setting that ensures sufficient clearance between the fender and the tire.
Front wheel tread
When the minimum front track width setting is used and the tractor is fitted with wide tires, the steering angle will
be very limited. Check that the clearance between the engine hood and the fenders is sufficient. To do this, raise the
tractor, and then raise and lower the steered front wheel; swing the axle and check that there is no interference.
Front axle width (regardless of the wheel width)
2WD front axle is 1300 mm in width.
4WD front axle is 1389 mm in width.
Fig. 5-5
Rear axle width (regardless of the wheel width)
The rear axle is 1390 mm in width.
Fig. 5-6