DEUTZ-FAHR FL35-70HP Series, Руководство по эксплуатации

Страница: 205 / 417

Electrical system
204
Important:
Remove the ballast need complete the above operation in an opposite manner.
●
➢
Wheel metal disc
The metal disc must be installed by at least two workers – One undertakes to lift the metal disc up in place while
the other uses bolts to fix it.
Danger:
Please make sure to check the weight of each load. If it weighs more than the bearable limit (male: 30
kg, female: 20 kg), please use appropriate mechanical lifting devices.
5.6.2.Tractor ballast
➢
Front ballast
Notice:
When a tractor has large farm implement engaged in the rear, for your safety, it must be equipped with
enough front ballast, otherwise, rollover risks may happen!
➢
In order to adjust the front and rear ballast distribution, it is necessary to install front ballast in the front of the
tractor. For heavy-load ploughing or large sowing implement, etc. engaged, front ballast must be equipped in order
to prevent the tractor head holding up and ensure the driving safety.
For the FL35-70HP series tractor, the ballast consists of a ballast bracket, a draw lug, and ballast blocks.
The ballast bracket must be directly fixed onto the tractor.
The bracket weight is 45kg.
1. Ballast bracket;
2. Mounting bracket
3. Fixing bolt
Fig. 5-14