DEUTZ-FAHR FL35-70HP Series Скачать руководство пользователя страница 4

Страница: 4 / 417

●

This tractor is suitable for agricultural applications. Any application beyond its design will be regarded as

improper use. The manufacturer shall not assume any damage or injury due to improper use of the tractor.

Warning

Notice:

Before any modification of this tractor, please consult the dealer. The manufacturer shall not bear any

responsibility for any damage or injury caused by any unauthorized modification of this machine.

The production process may be modified after this manual has been printed, so the instructions, illustrations,

specifications or other information in this manual may not completely fit your tractor.

The manufacturer in all cases shall reserve the right to modify the relevant products subject to no prior notice.

Expected Use

●

FL35-70HP series wheeled tractor is a middle-size agricultural wheeled tractor with multiple functions. This

machine is characteristic of compact structure, convenient control, flexible steering, large traction force, wide

application and convenient maintenance and repair. It can be used in cultivation, harrowing, seeding and

harvesting operations if being equipped with suitable agricultural tools; it can be used for transportation

operation if being equipped with trailer. The trailer mass ratios (proportion of total mass of the trailer and the

total mass of the tractor) shall not be more than 3; it can be operated jointly with the straw field returning

machine via power output, and can also be used as original power of pump and thresher. Please correctly

prepare supporting agricultural machines to obtain the maximum economic benefits in accordance with

requirements of this manual. Users shall strictly abide by utilization, maintenance and repair conditions

stipulated by the manufacturer and basic requirements of expected use. Use in other operations will violate

expected use of the tractor.

●

The tractor can only be operated, maintained and repaired by personnel who are familiar with characteristics

of the tractor and have relevant safety operation knowledge.

●

Rules for preventing accidents, other safety regulations and road traffic rules must be abided by all the time.

●

The manufacturer will not be responsible for reliability reduction, machine damage or personal injury due to

arbitrary change of the tractor or operation violating expected use of the tractor.

●

It is prohibited to be engaged in operation that is not mentioned in the above.

●

It is prohibited to be used overload cultivation and transportation.

●

It is prohibited that the bucket of the tractor is loaded with person.

To Owner of the New Tractor

Dear user:

Содержание FL35-70HP Series


































































































































































































































































































































































































































Результаты поиска

Содержание FL35-70HP Series

Отзывы:

Похожие инструкции для FL35-70HP Series

Бренды по названию

Популярные бренды

DEUTZ-FAHR FL35-70HP Series, Руководство по эксплуатации

Результаты поиска

Содержание FL35-70HP Series

Отзывы:

Похожие инструкции для FL35-70HP Series

Бренды по названию

Популярные бренды