Dentsply Sirona DAC Universal, Руководство по эксплуатации

Страница: 93 / 146

66 15 574 D3472
D3472
.
201.20.01
.
02 03.2019
93
Sirona Dental A/S 5 Operation
Operating Instructions DAC Universal 5.3 Reprocessing with the DAC Universal
båÖäáëÜ
10. Remove the Standard lid from the holder on the DAC Universal at the
end of the cycle to allow the instruments to cool down faster.
11. Place the Standard lid on the counter or put it in the lid holder.
12. Check the instruments visually to make sure they are dry.
13. Check the instruments visually to make sure they have been cleaned.
14. Notice the cycle number and check on your documentation (printer,
software, etc.) that the cycle was conducted properly: For
sterilization, "Sterilization, time, ok" must be indicated.
15. Check whether the dark status bar of the chemical indicator is in the
"ACCEPT" range.

If everything is correct, reprocessing was successful.
16. Document the cycle according to the work instructions applicable in
your practice.
17. Remove all the instruments from the Standard lid, when the lid and
the instruments have cooled down sufficiently. See the separate
operating instructions for adapters for detailed instructions on how to
remove the instruments from the individual adapters.

The instruments can now be used again.

Sterilization of unwrapped instruments is not sufficient for invasive
procedures. After wrapping the instruments, see "Pre- and post-
reprocessing of instruments [ → 47]" another sterilization must be
conducted in a class B sterilizer (e.g. DAC Premium).
CAUTION
Risk of burns!
Even when the Standard lid is half or completely open, the instruments
are still hot. Allow the extremely hot instruments to cool down after the
process.
CAUTION
Risk of burns!
The metal part of the lid is very hot. At the end of the cycle, touch only
the plastic part of the lid.
IMPORTANT
When the instruments are cooling down it is recommended to let the
heads of the instruments point downwards to speed up the cooling
process.