Dentsply Sirona DAC Universal, Руководство по эксплуатации

Страница: 90 / 146

90
66 15 574 D3472
D3472
.
201.20.01
.
02 03.2019
5 Operation Sirona Dental A/S
5.3 Reprocessing with the DAC Universal Operating Instructions DAC Universal
5.3.2 Reprocessing with the Standard lid
The Standard lid is used for reprocessing unwrapped rotating
handpieces.
Tip: If there are many instruments to be reprocessed or to ensure the
instruments will be available again quickly, we recommend using a
second Standard lid.
For a detailed procedure for attaching the instruments to the adapters,
please refer to the separate operating instructions for adapters.
5.3.2.1 Start cycle on the Standard lid
Process
✔
All settings of the DAC Universal were preset according to "Regular
activities [ → 47]".
✔
The DAC Universal is switched on and ready for operation.
✔
The maximum number of 6 instruments are ready for reprocessing.
✔
The Standard lid is at hand and cooled down.
1. Remove the Standard lid from the holder on the DAC Universal.
2. Place the Standard lid on the counter or put it in the lid holder.
3. Plug each instrument onto the corresponding adapter on the
Standard lid. For more information on attaching the instruments or
changing the adapters see the separate operating instructions for
adapters.
4. Attach a suitable chemical indicator in the indicator holder for the
Standard lid in the groove on the center post of the Standard lid. See
"Checking the reprocessing result with an indicator / PCD test device
[ → 48]" for more information on using the chemical indicator / PCD
test device.
WARNING
The instruments must not be wrapped when using the Standard lid, as
cleaning, lubrication, and sterilization would then fail.
IMPORTANT
Do not start the DAC Universal without a lid inserted into the holder.
NOTICE
If only SIROPure instruments are reprocessed on the lid, you must
deactivate lubrication before starting the cycle. For further information
on how to deactivate lubrication, see process below.