Dentsply Sirona DAC Universal, Руководство по эксплуатации

Страница: 101 / 146

66 15 574 D3472
D3472
.
201.20.01
.
02 03.2019
101
Sirona Dental A/S 5 Operation
Operating Instructions DAC Universal 5.3 Reprocessing with the DAC Universal
båÖäáëÜ

There are instruments on the Flex lid; the DAC Universal is still
open and ready for a cycle.

The display shows the last used program:
"Ready 134 °C"
or
"Ready 134 °C 18min"
.

The selected program is displayed at the top of the ready screen.
The program is shown as temperature/holding time.
6. Make sure the Flex lid is selected. If not, press the “Up/Down”-Keys
accordingly, to select this lid.
7. Press the “Start/Stop“-Key to start the cycle.

A prompt appears on the display, as seen on the picture, asking
you to confirm that the Flex lid is in fact inserted into the DAC
Universal.
8. Press the “Down”-Key to confirm that the Flex lid is inserted into the
DAC Universal.

A prompt to press down on the safety ring appears on the display.
9. Press down on the safety ring to start the cycle. If the safety ring is
not pressed within 20 seconds, you must choose the lid and press the
"Start"-Key again.

The Flex lid of the DAC Universal closes as soon as the safety
ring is pressed.

The DAC Universal automatically runs the cleaning and high-
level disinfection cycle.

The display shows at any time which phase the DAC Universal is
in, see section "Display information [ → 59]“.
IMPORTANT
If you do not select a program, the last used program will be used.
If you want to change the program, proceed as follows:
✔
The Flex lid is inserted in the holder of the DAC Universal,
➢ Enter the "Program selection" menu and use the "Left/Right"-Keys
accordingly to select the appropriate program.
➢ Press the "Down"-Key to confirm your selection.
➢ Press the "Up"-Key to return to the start screen.
IMPORTANT
If no lid is selected the Standard lid is set as default.