Dentsply Sirona DAC Universal, Руководство по эксплуатации

Страница: 56 / 146

56
66 15 574 D3472
D3472
.
201.20.01
.
02 03.2019
5 Operation Sirona Dental A/S
5.1 Regular activities Operating Instructions DAC Universal
Replacement of the oil bottle
✔
The lid of the DAC Universal water tank is open.
1. Unscrew the empty oil bottle counterclockwise and remove it from the
oil dispenser.
2. Remove the lid from the new NitramOil #2 bottle.
3. Press the black top of the oil bottle to release the transport lock.
4. Insert the new oil bottle thread down into the thread of the oil
dispenser (next to the water tank).
5. Turn the oil bottle carefully clockwise until you meet resistance.
6. Close the lid of the water tank.

The oil bottle has been replaced.
Tip: You can also remove a partially used oil bottle that is not yet empty
from the DAC Universal and insert it again at a later time.
5.1.4 Pumping lubrication concentrate through the system
When a new bottle of lubrication concentrate has been inserted, you must
check whether oil is pumped into the chamber.
See "Checking oil supply to the chamber [ → 105]" for the procedure.
5.1.5 Filling the water tank
If no permanent water connection is selected, the DAC Universal water
tank must be filled with water manually.
1 filled water tank corresponds to approx. 2 complete cycles of the
standard program.
Capacity of the water tank: 2 liters / 0.44 imperial gallons.
Minimum filling of the water tank: 1.1 liters / 0.24 imperial gallons for a
standard program at 134 °C (273 °F).
IMPORTANT
The oil bottle must be replaced when the "Low oil" message appears on
the display.
IMPORTANT
If the oil bottle is not completely empty, small quantities of oil may leak
out of the bottle. Wipe the oil away with an absorbent cloth.
IMPORTANT
Remember to empty the drain tank when it is full, see „Removing and
cleaning the drain tank [ → 113]".