Dell Force10 TeraScale C Series, Справочное руководство

Страница: 539 / 1640

High Availability (HA) | 539
Example Figure 21-2. redundancy force-failover sfm (EtherScale only) Command Example
redundancy primary
c e
Set an RPM as the primary RPM.
Syntax
redundancy primary
[
rpm0
|
rpm1
]
To delete a configuration, enter
no redundancy primary
.
Parameters
Defaults
The RPM in slot R0 is the Primary RPM.
Command Modes
CONFIGURATION
Command
History
redundancy protocol
c e
Enable hitless protocols.
Syntax redundancy protocol
{
lacp
|
xstp
}
To disable a hitless protocol, enter
no redundancy protocol
{
lacp
|
xstp
}.
Parameters
Defaults Disabled
Command Modes CONFIGURATION
Command
History
FTOS#redundancy force-failover sfm 0
%TSM-6-SFM_FAILOVER: Standby switch to SFM 8
Standby switch to SFM 0
FTOS#
rpm0
Enter the keyword
rpm0
to set the RPM in slot R0 as the primary RPM.
rpm1
Enter the keyword
rpm1
to set the RPM in slot R1 as the primary RPM.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series
lacp
Enter the keyword
lacp
to make LACP hitless.
xstp
Enter the keyword
xstp
to invoke hitless STP (all STP modes—MSTP, PVST+,
RSTP, STP).
Note:
On the C-Series, hitless STP is available only for MSTP, PVST+,
and RSPT.
Version 8.2.1.0 Introduced on C-Series
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on E-Series