Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1517 / 1640

C-Series Diagnostics and Debugging | 1517
debug ifm trace-flags
c
Turn on IFM internal trace-flags.
Syntax debug ifm trace-flags trace-flag
Disable this command using the no debug ifm trace-flags command.
Parameters
Defaults
None.
Command Mode
EXEC
EXEC Privilege
Command
History
Usage
Information
Turning on a trace flag does not result in an output to the console/terminal. It prints trace information
to the trace buffer, which is viewed using the
show trace history command.
show software ifm
c
View interface management information.
Syntax show software ifm
{
clients
[
summary
] |
ifagt number | ifcb interface | linecard number |
trace-flags
}
Parameters
trace-flag Enter a hexadecimal number representing the trace-flag.
Version 4.2.1.0 Introduction
Warning:
Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.
clients
(OPTIONAL) Enter the keyword
clients
to view information on IFM clients.
summary
(OPTIONAL) Enter the keyword
summary
to view show brief information
of IFM clients.
ifagt
Enter the keyword
ifagt
to view software pipe and IPC statistics for IFAGT.
ifcb
Enter the keyword
ifcb
to view information about the Interface Control Block.
linecard
Enter the keyword
linecard
view interface management information for line
cards.
trace-flags
Enter the keyword
trace-flags
to view interface management
information for internal trace flags.