Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1527 / 1640

C-Series Diagnostics and Debugging | 1527
show diag
c
View diagnostics information.
Syntax show diag { information | linecard number | summary | detail }
Parameters
Defaults
None.
Command Mode
EXEC
EXEC Privilege
Command
History
H
Usage
Information
PoE Hardware Status Commands
Inspect C-Series line card internal commands with regard to Power over Ethernet (PoE).
show hardware linecard poe-status
c s
Display the status of the four C-Series PoE controllers and the entire registers associated with each
controller.
Syntax show hardware linecard number poe-status
Parameters
Defaults No default behavior or values
Command Modes EXEC
Command
History
information
Enter the keyword
information
to view diagnostics processes
by line card.
linecard
Enter the keyword
linecard
for diagnostics information for a
particular line card.
number Enter a line card number.
Range: 0-7 for the C300
summary
Enter the keyword
summary
brief diagnostics information.
detail
Enter the keyword
detail
for detailed diagnostics information.
Version 7.5.1.0 Introduction
Warning:
Do not use this command when a line card is in a booting state.
linecard number
Enter the keyword
linecard
followed by the line card slot number.
Version 7.7.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series