manualshive.com logo in svg

Dell Force10 TeraScale C Series, Справочное руководство

Поделиться
Скачать
Dell Force10 TeraScale C Series Скачать руководство пользователя страница 1207

Quality of Service (QoS) |

1207

Parameters

 

Defaults

No default behavior or values

Command Modes

CONFIGURATION (conf-policy-map-in and conf-policy-map-out)

Command

History

Usage

Information

There are eight (8) queues per interface on the E-Series and four (4) queues per interface on the 
C-Series and S-Series. This command assigns a class map or QoS policy to different queues.

Related

Commands

 

set 

c e s

Mark outgoing traffic with a Differentiated Service Code Point (DSCP) or dot1p value. 

Syntax

set 

{

ip-dscp value

 | 

mac-dot1p value

}

Parameters

 

Defaults

No default behavior or values

Command Modes

CONFIGURATION (conf-qos-policy-in)

Command

History

queue-id

Enter the value used to identify a queue.

Range: 0 to 7 on E-Series (eight queues per interface), 0-3 on C-Series and 
S-Series (four queues per interface; four queues are reserved for control 
traffic.)

class-map

 

class-map-name

(OPTIONAL) Enter the keyword 

class-map

 followed by the class map 

name assigned to the queue in character format (16 character maximum). 

Note: 

This option

 

is available under policy-map-input only.

qos-policy

 

qos-policy-name

(OPTIONAL) Enter the keyword 

qos-policy

 followed by the QoS policy 

name assigned to the queue in text format (16 characters maximum). This 
specifies the input QoS policy assigned to the queue under 

policy-map-input

 

and output QoS policy under 

policy-map-output

 context.

Version 7.6.1.0

Introduced on S-Series

Version 7.5.1.0

Introduced on C-Series

pre-Version 6.1.1.1

Introduced on E-Series

class-map

Identify the class map.

service-policy input

Apply an input policy map to the selected interface.

service-policy output

Apply an output policy map to the selected interface.

ip-dscp value

(OPTIONAL) Enter the keyword 

ip-dscp 

followed by the IP DSCP value.

Range: 0 to 63

mac-dot1p value

 

Enter the keyword 

mac-dot1p 

followed by the dot1p value.

Range: 0 to 7

On the C-Series and S-Series allowed values are:0,2,4,6

Version 8.2.1.0

mac-dot1p

 available on the C-Series and S-Series

Version 7.6.1.0

Introduced on S-Series

Version 7.5.1.0

Introduced on C-Series

Содержание Force10 TeraScale C Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды