Dell Force10 TeraScale C Series, Справочное руководство

Страница: 848 / 1640

848 | Intermediate System to Intermediate System (IS-IS)
www.dell.com | support.dell.com
Defaults metric metric-value
= 0;
metric-type
= internal;
level-2
Command Modes ROUTER ISIS ( for IPv4 )
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
Command
History
Usage
Information
To redistribute a default route (0.0.0.0/0), configure the default-information originate command.
Changing or disabling a keyword in this command will not affect the state of the other command
keywords.
When an LSP with an internal metric is received, the FTOS considers the route cost taking into
consideration the advertised cost to reach the destination.
Redistributed routing information is filtered with the distribute-list out command to ensure that the
routes are properly are passed to the receiving routing protocol.
How a metric value assigned to a redistributed route is advertised depends on how on the configuration
of the
metric-style command. If the metric-style command is set for narrow or transition mode and the
metric value in the redistribute command is set to a number higher than 63, the metric value advertised
in LSPs will be 63. If the metric-style command is set for wide mode, an the metric value in the
redistribute command is advertised.
Related
Commands
metric metric-value
(OPTIONAL) Assign a value to the redistributed route.
Range: 0 to 16777215
Default: 0. You should use a value that is consistent with the destination
protocol.
metric-type
{
external
|
internal
}
(OPTIONAL) The external link type associated with the default route
advertised into a routing domain. You must specify one of the following:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 1
routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2
routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2
routes.
This is the default.
route-map map-name
(OPTIONAL) If the
route-map
argument is not entered, all routes are
redistributed. If a
map-name
value is not specified, then no routers are
imported.
Version 7.5.1.0 Introduced IPv6 ISIS support
Version 6.3.1.0 Introduced
default-information originate Generate a default route for the IS-IS domain.
distribute-list out Suppress networks from being advertised in updates. Redistributed
routing information is filtered by this command.