Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1443 / 1640

Time and Network Time Protocol (NTP) | 1443
Command Modes
EXEC
EXEC Privilege
Command
History
Example Figure 59-7. show ntp status Command Example
Related
Commands
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Table 59-2. show ntp status Command Example Information
Field Description
“Clock is...” States whether or not the switch clock is synchronized,
which NTP stratum the system is assigned and the IP
address of the NTP peer.
“frequency is...” Displays the frequency (in ppm), stability (in ppm) and
precision (in Hertz) of the clock in this system.
“reference time is...” Displays the reference time stamp.
“clock offset is...” Displays the system offset to the synchronized peer and
the time delay on the path to the NTP root clock.
“root dispersion is...” Displays the root and path dispersion.
“peer mode is...” State what NTP mode the switch is. This should be
client mode.
FTOS#sh ntp status
Clock is synchronized, stratum 2, reference is 100.10.10.10
frequency is -32.000 ppm, stability is 15.156 ppm, precision is 4294967290
reference time is BC242FD5.C7C5C000 (10:15:49.780 UTC Mon Jan 10 2000)
clock offset is clock offset msec, root delay is 0.01656 sec
root dispersion is 0.39694 sec, peer dispersion is peer dispersion msec
peer mode is client
FTOS#
show ntp associations Display information on NTP master and peer configurations.