Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1223 / 1640

Quality of Service (QoS) | 1223
wred
e
Designate the WRED profile to yellow or green traffic.
Syntax wred { yellow | green } profile-name
To remove the WRED drop precedence, use the no wred { yellow | green } [ profile-name]
command.
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-qos-policy-out)
Command
History
Usage
Information
Use this command to assign drop precedence to green or yellow traffic. If there is no honoring enabled
on the input, all the traffic defaults to green drop precedence.
Related
Commands
wred-profile
e
Create a WRED profile and name that profile.
Syntax wred-profile wred-profile-name
To remove an existing WRED profile, use the
no wred-profile
command.
Parameters
Defaults
The five pre-defined WRED profiles. When a new profile is configured, the minimum and maximum
threshold defaults to predefined wred_ge_g values
Command Modes
CONFIGURATION
yellow
|
green Enter the keyword
yellow
for yellow traffic. DSCP value of xxx110 and
xxx100 maps to yellow.
Enter the keyword
green
for green traffic. DSCP value of xxx010 maps to
green.
profile-name Enter your WRED profile name in character format (16 character
maximum). Or use one of the 5 pre-defined WRED profile names.
Pre-defined Profiles:
wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_
Version 8.2.1.0 Profile name character limit increased from 16 to 32.
pre-Version 6.1.1.1 Introduced on E-Series
wred-profile Create a WRED profile and name that profile
trust Define the dynamic classification to trust DSCP
wred-profile-name
Enter your WRED profile name in character format (16 character maximum). Or
use one of the pre-defined WRED profile names. You can configure up to 26
WRED profiles plus the 5 pre-defined profiles, for a total of 31 WRED profiles.
Pre-defined Profiles:
wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_g