Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1363 / 1640

SNMP and Syslog | 1363
Related
Commands
snmp-server group
c e s
Configure a new SNMP group or a table that maps SNMP users to SNMP views.
Syntax snmp-server group
[
group_name
{
1
|
2c | 3
{
auth
|
noauth
|
priv
}}] [
read name
] [
write
name
] [
notify name
]
[ access-list-name | ipv6 access-list-name | access-list-name ipv6
access-list-name
]]
To remove a specified group, use the
no snmp-server group
[
group_name
{
v1
|
v2c | v3
{
auth
|
noauth
|
priv
}}] [
read name
] [
write name
] [
notify name
]
[ access-list-name | ipv6
access-list-name | access-list-name ipv6 access-list-name
]] command.
Parameters
show snmp engineID
Display SNMP engine and all remote engines that are configured on the
router
show running-config snmp Display the SNMP running configuration
group_name
Enter a text string (up to 20 characters long) as the name of the group.
Defaults: The following groups are created for mapping to read/write
community/security-names.
•
v1v2creadg
— maps to a community/security-name with
ro
permissions
•
1v2cwriteg
—
maps to a community/security-name
rw
permissions
1 | 2c | 3
(OPTIONAL) Enter the security model version number (
1
,
2c
, or
3)
.
•
1
is the least secure version
•
3
is the most secure of the security modes.
•
2c
allows transmission of informs and counter 64, which allows for
integers twice the width of what is normally allowed.
Default:
1
auth
(OPTIONAL) Enter the keyword
auth
to specify authentication of a packet
without encryption.
noauth
(OPTIONAL) Enter the keyword
noauth
to specify no authentication of a
packet.
priv
(OPTIONAL) Enter the keyword
priv
to specify both authentication and
then scrambling of the packet.
read name (OPTIONAL) Enter the keyword
read
followed by a name (a string of up
to 20 characters long) as the read view name.
Default: GlobalView is set by default and is assumed to be every object
belonging to the Internet (1.3.6.1) OID space.
write name
(OPTIONAL) Enter the keyword
write
followed by a name (a string of up
to 20 characters long) as the write view name.
notify name (OPTIONAL) Enter the keyword
notify
followed by a name (a string of up
to 20 characters long) as the notify view name.
access-list-name
(Optional) Enter the standard IPv4 access list name (a string up to 16
characters long).
ipv6 access-list-name
(Optional) Enter the keyword
ipv6
followed by the IPv6 access list name (a
string up to 16 characters long)
access-list-name ipv6
access-list-name (Optional) Enter both an IPv4 and IPv6 access list name.