Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1522 / 1640

1522 | C-Series Diagnostics and Debugging
www.dell.com | support.dell.com
Command
History
H
Example Figure 64-15. show cpu-traffic-stats linecard Command Example
Usage
Information
The statistics are displayed only if at least one of the counters is non-zero for any linecard, Port-Pipe,
or port combination.
show hardware linecard fpga
c
Display internal information about the line card FPGA.
Syntax show hardware linecard slot fpga
{
errorlog | registers | stats
}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
show hardware rpm fpga
c
Display internal RPM FPGA information.
Syntax show hardware rpm slot fpga
{
errorlog | linecard
{
slot registers
} |
registers | stats |
standby-rpm registers
}
Version 7.5.1.0 Introduction
FTOS#show cpu-traffic-stats linecard all
Stats for Line card 2, Port pipe 0, Port 0
----------------------------------------------
Numbers of packets trapped due to Egress MTU violation : 1
Numbers of packets trapped due to TTL 1 or IP Options : 0
Numbers of packets trapped due to TTL 0 : 0
slot Enter the line card slot number.
Range: 0 to 7
errorlog
(OPTIONAL) Enter the keyword
errorlog
to dump the FPGA Error Log.
registers
(OPTIONAL) Enter the keyword
registers
to dump the FPGA Registers.
stats
(OPTIONAL) Enter the keyword
stats
to dump the FPGA Interrupt
Statistics.
Version 7.5.1.0 Introduced
Warning:
Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.